Menü überspringen

TT 160/TT 460

Cable

Radio and infrared

Tool touch probe

TT 160

TT 460

Probe accuracy

±15 µm

Probe repeatability

Repeated probing from one direction

2 σ 1 µm at a probing velocity of 1 m/min

Typical values:

2 σ 1 µm at a probing velocity of 3 m/min

2 σ 4 µm at a probing velocity of 5 m/min

Deflection of probe contact

5 mm in all directions

Deflection force

Axial: approx. 8 N

Radial: approx. 1 N

Probing velocity

5 m/min

Protection EN 60 529

IP67

Operating temperature

10 °C to 40 °C

Storage temperature

–20 °C to 70 °C

Mass

Approx. 0.3 kg

Approx. 0.4 kg

Mounting on the machine table

  • Fastening by fixing clamps (included in delivery)
  • Fastening with mounting base (accessory)

Electrical connection

M12 flange socket, 8-pin

Cable length

25 m

Voltage supply

10 V to 30 V DC / 100 mA (with no load)

2 batteries (rechargeable or non-rechargeable)
1/2 AA or size LR2, each 1 V to 4 V

Operating time

Continuous duty: typically 400 h1) with lithium batteries

Output signals

  • Trigger signals S and S (square-wave signal and its inverted signal)
  • Floating trigger output

HTL signal levels

UH 20 V with –IH 20 mA

UL 2.8 V with IL 20 mA

at 24 V DC rated voltage

Signal transmission

Cable

Radio or infrared transmission (selectable)
with 360° range to SE

Transceiver unit

  • SE 6602) for radio and infrared transmission
  • SE 6422) for infrared transmission

TT switch-on/off

Radio or infrared signal (selectable) from SE

1) Reduced operating time if there is much surrounding radio traffic, or short but frequent probing intervals

2) SE shared by TS 460 and TT 460, see page 28